Soler & Palau Sabik 210-F - G4/G4 (original filter set)
Soler & Palau Sabik 210-F - G4/G4
(original filter set)
This set consists of: 2 filters - Both filters serve to filter the incoming air.
Filter class: G4 - EN779:2012 | ISO coarse 60% - ISO 16890
Suitable for: Soler & Palau Sabik 210-F
Images are for illustration.
Soler & Palau no.: 5800046700
You can easily replace the HRV filters for the Soler & Palau Sabik 210-F yourself.
With the purchase of these heat recovery filters you bring fresh air from the outside in. Good ventilation is important to maintain the indoor climate of the home, but also to ensure that substances, dirt, bacteria and fungi cannot build up in the ventilation system.
The filter standard: EN799:2012 has been replaced by the filter standard: ISO16890 sinds since 1 July 2018
The filters are placed in so-called ePM categories.
This classification gives an accurate indication of which particle sizes are filtered out of the air.
PM1 stands for all types of particulate matter ('ParticulateMatter') that are smaller than 1 micron (μ = one thousandth of a millimeter):
- PM1: 1μ = 0.001 mm
- PM2.5: 2.5μ = 0.0025 mm
- PM10: 10μ = 0.01mm
The 'e' for PM1 stands for 'efficiency' and indicates the efficiency of the air filter in capturing PM1.
Based on these values, the standard now divides filters into four groups that filter different dust particles:
- ISOCoarse< 50% (sand, fluff, hair)
- ISO ePM10 ≥ 50% (pollen, rock dust)
- ISO ePM2.5 ≥ 50% (mold traces, toner dust)
- ISO ePM1 (combustion particles, nanoparticles, viruses)